• sensor: 1/3" 4MP Progressive Scan CMOS
• resolution: 2560x1440 / 20 fps
• interface: Ethernet 10Base-T/100Base-TX PoE 802.3af
• compression: H.265+/ H.265/ H.264+/ H.264/ MJPEG
• number of pixels: 4Mpx
• sensitivity: 0.01lux/F2.0 (AGC ON), 0lux (IR LED ON)
• lens: 2.8mm / F2.0
• illuminator: Smart IR LED EXIR 2.0 (range 30m)
• AWB, AGC, BLC, 3D DNR, DWDR, ROI
• mechanical infrared filter ICR
• standards compliance: ONVIF
• processing speed and resolution:
  • 20 fps for 2560×1440 (4Mpx)
  • 25/30 fps for 2304×1296 (3Mpx)
  • 25/30 fps for 1920×1080 (1080p)
• bitrate: 32 Kbps ~ 8 Mbps
• image preview
  • programs: iVMS-4200, Hik-Central
  • web browsers: IE, Firefox, Chrome, Safari
  • Android or iOS app: Hik-Connect, Hik-ProConnect
• power supply: 12V DC lub PoE 48V (802.3af)

Camera highlights

The DS-2CD1043G0-I (C) is a two-stream tube camera equipped with a  1/3 "4Mpx Progressive Scan CMOS image sensor that allows you to record video recordings at a maximum speed of 20 fps at a resolution of 4MPX (2560 × 1440) .  H.265+ means that the signal sent by the camera takes up less space on a recording medium (e.g. HDD), which translates into effective protection and longer data storage. The strength of the camera is its fixed lens and the intelligent IR EXIR iluminator radiator 2.0 The diodes used are characterized by a long lifetime (30 ~ 40 thousand hours) and due to therectangular luminous flux , uniform coverage of the observed scene, also in the corners. The tight housing of the camera is characterized by a high degree of resistance to  unfavorable weather conditions (IP67) . The G0-I Easy IP Lite+ series is also equipped with a hardware WDR of 120 dB.

Intuitive menu navigation

Managing, programming settings and operating  the HIKVISION camera takes place in a clear and transparent device managing program, which is available from the level of a web browser. Using the intuitive menu of the program, it is possible not only to test the cameras and view the recorded image in real time, but it is also possible to set advanced parameters and functions of the device.

Image correction functions

• 3D DNR -DNR is a system that allows you to electronically minimize the noise in an image. It is based on dynamic real-time regulation, constantly reacting to changing conditions.

• WDR 120dB- (Wide Dynamic Range) - The wide dynamic range of the image is a system with which it is possible to observe a complex scene while maintaining the transparency of all image planes.

RoI (Region of interest)

It is an intelligent codec that allows you to improve the quality of selected image fragments and to reduce the quality of other fragments. This has a positive effect on the use of the computing power of the signal processor, reduces the requirements for network bandwidth and improves the identification of only the most sensitive points.

Privacy masks

It is a function that allows individual adjustment of the way the observation system operates to the spatial specificity and safety requirements of a specific installation site. Thanks to the privacy mask system, it is possible to freely determine the fragments of the image that will be excluded from the video surveillance.

Promiennik EXIR

EXIR infrared illuminators are an innovative technology that uses the latest type of highly efficient EXIR infrared LEDs. Contrary to standard radiators with round diodes, EXIR lamps generate a luminous flux with a rectangular characteristic. Thanks to this, they perfectly and evenly cover the entire observation plan, both the central points of the stage and the corners. In traditional technology, usually the center of the plan was overexposed while the corners of the image are underexposed. Compared to the previous generation, EXIR has better heat dissipation and increased service life by up to 20 thousand hours.

24/7 IP monitoring

Thanks to the efficient infrared illuminator built into the DS-2CD1043G0-I(C) dome camera, the device is suitable for uninterrupted observation 24 hours a day. The system installed in the device, based on powerful IR EXIR diodes, generates a strong beam of infrared light, which perfectly illuminates the entire area covered by video monitoring and makes the recorded image clear and legible. Contrary to standard radiators, the lighting in the Black Glass technology is evenly distributed over the entire observation plan, which prevents the image from being overexposed in the foreground. When the camera detects changes in the level of illumination of the lens working area, it will automatically activate the illuminator, which ensures trouble-free image capture at a maximum distance of 30 meters. In addition, the camera uses a mechanical ICR infrared filter, thanks to which it is possible to capture the optimal values ??of light reaching the camera sensor.

Robust camera construction

The use of the external Easy IP Lite+ camera  DS-2CD1043G0-I(C) will allow us to create a professional monitoring structure that will continuously function both inside and outside the protected facilities. The robust workmanship and high resistance of the camera guarantee uninterrupted operation of the device even in the most demanding installation environments. In addition, the high quality of the housing confirms that the device has been given the IP67 protection class. The camera is resistant to possible interference of solids and maintains its functionality even in the event of a momentary contact with a strong stream of water. Dust-proof, impact-resistant, as well as various mounting options guarantee that the Hikvision CCTV camera with a 2.8 mm lens will perfectly fit into any working environment

Signal transmission and power supply with one cable - PoE

Power over Ethernet is a solution designed for quick and easy installation of network devices, comfortable operation of the equipment and easy modernization of the installation. Thanks to PoE support in the 802.3af standard, it will be possible to connect an IP camera using the popular UTP twisted-pair cable. The saving of the total number of cables necessary to start the device improves the monitoring system and allows the location of the camera away from traditional mains power sources.

Innovative codec - Hikvision H.265+

H.265 + is a video coding system that is an extension of the technology used in H.265 / HEVC (High Efficiency Video Coding). The H.265 + system is the latest version of the codecs used in monitoring, which is based on an intelligent algorithm developed by the Hikvision company. H.265 signal encoding is a remarkable technology that allows you to optimize the basic functions of the camera and enables better use of network bandwidth, significantly reduces interference and guarantees long archiving times without compromising image quality. Field tests show that H.265 + compression reduces the required level of high definition video bitrate by approximately 67% compared to H.265, thus reducing the required bandwidth and storage / HDD capacity. Reducing the number of bits means lowering costs for consumers as well as increasing the efficiency, stability and reliability of all equipment in a given surveillance system. The use of the H.265+ codec brings the most spectacular results in images where the background remains unchanged and rarely changes; in the case of objects moving on a stagnant scene and with 24-hour surveillance.

Direct access to the camera on the Hik-Connect platform

The presented device allows you to directly establish a connection with a computer or any mobile device via a cloud-based system. The advantage of this solution is the ability to gain remote access to both the camera, recorder, recordings, and a number of useful functionalities. Device registration is very simple via a web browser or via QR codes. It is worth emphasizing that the P2P Hikvision service does not require additional port forwarding from the user. The method of communication in the Peer to Peer technique significantly facilitates access to the monitoring system, which is a solution especially recommended when using LTE mobile wireless Internet.

Software iVMS-4200 & iVMS-4500

The free iVMS 4200 client software is available in the set with the camera. The program is used for image preview, surveillance and camera configuration. The application is highly functional and allows you to create a professional workplace for the system supervisor and other users. The CMS client can cooperate with up to 256 recorders and in addition to displaying live image or playing recordings, it enables multi-monitor operation, e-map support, display of alarm messages, two-way audio transmission or advanced search for individual events. In the case of more complex systems, a useful function of the application is the ability to create accounts with different levels of authorization. The program for a personal computer is complemented by the iVMS-4500 mobile application, which is available for Android, iOS or Windows Phone. 

SADP configuration application

The SADP application (Search Active Devices Protocol) is a user-friendly software tool for online device search that does not require installation. It searches for active online devices on your subnet and displays information about those devices. With this software you can also modify the basic network parameters of these devices.

Specifications: