-
0,25 € netto
Ubiquiti USW-24-POE is a switch adapted to UniFi networks, it belongs to the new Gen2 family. It is equipped with 24 gigabit Ethernet ports and 2 SFP slots, there is a 16 PoE power output on Ethernet ports. PoE can work in the 802.3af or 802.3at standard (automatic detection), the maximum power per port is 32 W, and the entire device is 95 W. The device is equipped with a built-in AC adapter.
The offered product has been designed to be used in the UniFi network. It is configured from the UniFi Controller centralized management system, the same one used in access points and cameras. This allows you to unify your network and simplify its management. The switch supports Layer2 functions such as VLAN configuration, 802.1X control, RADIUS VLAN and spanning tree. Each port can work in switching, mirroring or aggregate mode.
The most important features:
- 24 Gigabit Ethernet ports 10/100/1000 Mb / s;
- 16 PoE outputs in 802.3af / at standard;
- 2 SFP slots;
- total PoE output power 92 W;
- Max PoE output power per port: 32 W;
- work under the control of the UniFi system.
Specification:
USW-24-POE | |
Interfaces Networking |
24x 10/100/1000 RJ45 Ports 2x 1G SFP Ethernet Ports |
Management | Ethernet In-Band |
Total Non-Blocking Throughput | 26 Gb/s |
Switching Capacity | 52 Gb/s |
Forwarding Rate | 38,69 Mp/s |
Power Method | 100-240VAC, 50/60 Hz, Universal Input |
Max Power Consumption(Excluding PoE Output) | 25 W (nie wliczaj?c zasilania PoE) |
LEDs |
System: status RJ45 Data Ports PoE: Speed/Link/Activity SFP Data Ports: Link/Activity |
Dimensions | 442,4 x 200 x 43,7 mm |
Weight |
Without Brackets: 3 kg With Brackets: 3,09 kg |
ESD/EMP Protection |
Air: ± 16 kV Contact: ± 12 kV |
Shock and Vibration | ETSI300-019-1.4 Standard |
Operating Temperature | -5 to 40° C |
Operating Humidity | 10 - 90% Noncondensing |
Certifications | CE, FCC, IC |
PoE | |
---|---|
Total Available PoE | 95 W |
PoE Interfaces | Ports 1-16 |
Standard PoE |
IEEE 802.3af/at (Pins 1, 2+; 3, 6-) |
Max. PoE Wattage per Port by PSE802.3at | 32 W |
Voltage Range |
802.3af: 44 - 57 V DC 802.3at: 50 - 57 V DC |