D-Link DGS-3630-28SC/SI L3 Managed Switch 20x SFP, 4x Combo (GE/SFP), 4x SFP+

D-Link DGS-3630-28SC/SI L3 Managed Switch 20x SFP, 4x Combo (GE/SFP), 4x SFP+

Produttore: D-Link

Codice prodotto: DL-DGS-3630-28SC/SI

Numero di catalogo: 8774

Garanzia (mesi):

Prezzo

1 829,81 €

2 250,67 € IVA inclusa

favoriteLista dei desideri

Descrizione

The DGS-3630 Series Gigabit L3 Stackable Managed Switches are designed for Small to Medium-sized Businesses (SMBs), Small to Medium-sized Enterprises (SMEs), large enterprises, and Internet Service Providers (ISPs). They deliver high performance, flexibility, fault tolerance, and advanced software features for maximum return on investment. With Gigabit Ethernet, SFP, 10 GbE SFP+, security features, and advanced Quality of Service (QoS), the DGS-3630 Series can act as core, distribution or access layer switches. High port densities, switch stacking, and easy management make the DGS-3630 Series suitable for a variety of applications.

Standard, Enhanced, and MPLS Images

The DGS-3630 Series is designed for use with three different software images: the Standard Image (SI), the Enhanced Image (EI), and the MPLS Image (MI). The Standard Image provides core SMB and SME functionality such as L2 switching, entry-level routing, L2 multicast, advanced QoS, Operations, Administration, and Maintenance (OAM), and robust security features. The Enhanced Image supports all the features of the Standard Image in addition to full L3 routing for enterprise integration, including OSPF, BGP, VRF-Lite and L3 multicast. The MPLS Image offers all the features of the Standard and Enhanced Images in addition to VPN services for ISPs, including IS-IS and MPLS L2/L3 VPN. With multiple software images, only the required features need to be installed, providing a flexible approach to software management. The product has Standard Image software.

High Availability and Flexibility

The DGS-3630 Series allows multiple switches to be combined to form a single physical2 or virtual stack. This increases redundancy over multiple physical units, simplifies management, and provides a single IP address to manage all members in the stack. Up to 9 switches can be combined using DACs to make up to 432 Gigabit Ethernet ports available, allowing switching capacity to be increased with demand. The Switch Resource Management (SRM) feature allows the hardware table size to be dynamically changed, so that switch functions can be optimised based on the use of the switch. There are 3 modes: IP Mode, LAN Mode, and L2 VPN Mode. These modes modify the size of the Layer 2 and 3 tables for optimum efficiency.

Switch and Link Failover

In addition to traditional Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree Protocol (MSTP), the DGS-3630 Series also supports advanced Ethernet failover redundancy technologies, such as ERPS and FlexLink. Ethernet Ring Protection Switching (ERPS) provides millisecond-level failover in a ring topology. Meanwhile, FlexLink offers link failover on designated switch ports, providing link redundancy without STP or LBD.

Security, Performance, and Availability

The DGS-3630 Series provides a complete set of security features including multi-layer Access Control Lists (ACLs) and 802.1X user authentication via TACACS+ and RADIUS. The DGS-3630 Series also offers extensive VLAN support, including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of QoS features help ensure that critical network services such as Voice over IP and video conferences are given high priority through the network. The D-Link Safeguard Engine increases the switches’ reliability, serviceability, and availability by preventing traffic flooding caused by malicious attacks.

Versatile Management

The DGS-3630 Series provides the D-Link Network Assistant Utility, an industry-standard CLI, and an intuitive web-based management interface that enables administrators to set up and remotely manage their networks. Support for SNMP allows centralised management of a large number of devices and out-of-band management is available via a dedicated console port. A mini-USB console port allows the DGS-3630 Series to be managed without any extra connectors, and a USB Type A port can be used to connect a storage device to store logs, configuration settings, and firmware images. The DHCP auto-configuration and auto-image features enable deployment of multiple switches automatically, saving costs for mass deployment. The DGS-3630 Series furthermore supports OpenFlow 1.3, allowing the switches to be managed using an OpenFlow controller.

6 kV Surge Protection

The DGS-3630 Series features built-in 6 kV surge protection on all Ethernet access ports. This effectively protects the switches against sudden electrical surges caused events such as lightning strikes or unstable electrical current. Built-in 6 kV surge protection significantly reduces the chances of equipment being damaged by electrical surges and effectively lowers maintenance costs by minimising the need for expensive equipment repairs or replacement.

D-Link Green Technology

The DGS-3630 Series features D-Link Green technology, which includes a power-saving mode, smart fan feature, reduced heat dissipation, and cable length detection. The power-saving feature automatically powers down ports that have no link or link partner and ensures that LEDs are shut off when not needed. The smart fan3 feature enables the built-in fans to automatically activate above a certain temperature threshold, providing continuous, reliable, and eco-friendly operation of the switch.

Features

High Availability and Flexibility

20 SFP ports
4 Combo 10/100/1000BASE-T/SFP ports
4 10 GbE SFP+ uplink ports
Switch Resource Management (SRM) for flexible management of system resources
6 kV surge protection on all RJ-45 access ports

Reliability

Redundant Power Supply (RPS) support
IEEE 802.1D/802.1w/802.1s Spanning Tree
Loopback Detection (LBD)
Ethernet Ring Protection Switching (ERPS)

High Bandwidth Stacking

Physical stack of up to 9 units, 432 GbE ports
Supports long-distance stacking over fiber
80 Gbps per device physical stacking bandwidth

Operations, Administration, and Maintenance

IEEE 802.3ah Ethernet Link OAM
IEEE 802.1ag/ITU-T Y.1731 Service OAM

Easy Management

RJ-45/mini-USB console port
Management and alarm ports
USB port for firmware and configuration files
Easy-to-use web GUI and industry-standard CLI

Specifications

General
DGS-3630-28SC/SI
Size	19-inch, 1U rack-mount size
Interfaces	20 x 10/100/1000BASE-T ports 4 x Combo 10/100/1000BASE-T/SFP ports 4 x 10 GbE SFP+ ports
Console Port	RJ-45 and Mini-USB console ports for out-of-band CLI management
Management Port	10/100/1000BASE-T RJ-45 Ethernet port for out-of-band IP management
Alarm Port	1 x RJ-45 port
USB Port	1 x USB 2.0 Type A port
Performance
Switching Capacity	128 Gb/s
Packet Forwarding Rate	95,24 Mp/s
Packet Buffer	4 MB
MAC Address Table	68K
IPv4 Routing Table (IPv4 / IPv6)	IPv4: 16K IPv6: 7K
IPv4 Forwarding Table (IPv4 / IPv6)	IPv4: 32K IPv6: 16K
Jumbo Frame Size	12 K
Physical
MTBF	280,612.09 hours
Acoustics	56 dB(A)
Heat Dissipation	216.81 BTU/h
Power Input	100 - 240 V AC 50/60 Hz
Maximum Power Consumption	63,58 W
Standby Power Consumption	30,1 W
Dimensions	441 x 259,8 x 44 mm
Weight	3,76 kg
Ventilation	2 x smart fans
Operating Temperature	-5 to 50 °C (23 to 122 °F)
Storage Temperature	-40 to 70 °C (-40 to 158 °F)
Operating Humidity	10% to 95% RH
Storage Humidity	5% to 95% RH
Surge Protection	6 kV surge protection on all Ethernet access ports
Safety Certifications	cUL, CB, CE, CCC, BSMI
EMI / EMC	CE, FCC Class A, C-Tick, VCCI, BSMI, CCC
Software features
Stackability	Physical stacking Up to 80 Gbps stacking bandwidth Up to 9 switches in a stack Ring/chain topology support Virtual stacking/clustering of up to 32 units Supports D-Link Single IP Management Up to 20 Gbps stacking bandwidth
L2 Features	MAC Address Table : up to 68K entries Flow Control 802.3x Flow Control when using full-duplex HOL Blocking Prevention Spanning Tree Protocol 802.1D STP 802.1w RSTP 802.1s MSTP Root Guard Loop Guard Jumbo Frame: up to 12 KBytes 802.1AX Link Aggregation Max. 32 groups per device, 8 ports per group ERPS (Ethernet Ring Protection Switching) version 2 Port Mirroring Supports One-to-One, Many-to-One, Supports Mirroring for Tx/Rx/Both Supports 4 mirroring groups Flow Mirroring Supports Mirroring for Rx VLAN Mirroring RSPAN L2 Protocol Tunneling Multi-Chassis Link Aggregation Group (MLAG)
VLAN	802.1Q 802.1v Protocol-based VLAN Double VLAN (Q-in-Q) Port-based Q-in-Q Selective Q-in-Q Port-based VLAN MAC-based VLAN Subnet-based VLAN Private VLAN VLAN Group Max. 4K VLAN groups Max. 4094 VIDs Multicast VLAN (ISM VLAN for IPv4/IPv6) Voice VLAN Auto Surveillance VLAN VLAN Trunking GVRP: Up to 4K dynamic VLANs Asymmetric VLAN
L2 Multicast	MLD Snooping MLD v1/v2 Snooping Supports up to 4K MLD groups Host-based MLD Snooping Fast Leave Supports 64 static MLD groups MLD Snooping Querier Per VLAN MLD Snooping MLD Proxy Reporting IGMP Snooping IGMP v1/v2/v3 Supports up to 8K MLD groups Supports 64 static IGMP groups Per VLAN IGMP Snooping IGMP Snooping Querier Host-based IGMP Snooping Fast Leave PIM Snooping
L3 Features	IPv4 ARP/IPv6 ND: support up to 32K/16K 512 Static ARP Gratuitous ARP IP Interface Supports 256 interfaces Loopback Interface Proxy ARP Support local ARP proxy IPv6 Tunneling Static ISATAP GRE 6to4 VRRP v2/v3 IP Helper
L3 Routing	Supports 16K hardware routing entries shared by IPv4/IPv6 1 entry consumed by each IPv4 route 2 entries consumed by each IPv6 route Supports up to 32K hardware L3 forwarding entries shared by IPv4/IPv64 1 entry consumed by each IPv4 route 2 entries consumed by each IPv6 route Static Route Max. 512 IPv4 entries Max. 256 IPv6 entries IPv4/IPv6 Default Route PBR (Policy-based Route) Null Route Route Preference Route Redistribution Graceful Restart (GR) Helper BFD (Bidirectional Forwarding Detection) IPv4/v6 Static Route RIP VRRP RIPv1/v2/ng
L3 Multicast	IGMP/MLD Filtering
QoS (Quality of Service)	802.1p 8 queues per port Queue Handling Strict Priority (SP) Weighted Round Robin (WRR) Strict + WRR Weighted Deficit Round Robin (WDRR) Congestion Control Weighted Random Early Detection (WRED) 802.1Qbb Priority-based Flow Control (PFC) for 10 GbE port Bandwidth Control Port-based (ingress/egress, min. granularity 8 Kb/s) Flow-based (ingress/egress, min. granularity 8 Kb/s) Per queue bandwidth control (min. granularity 8 Kb/s) Policy Map Remark 802.1p priority Remark IP precedence/DSCP Time based QoS CoS based on: Switch port Inner/outer 802.1p Priority Inner/outer VID MAC address Ether Type IP address ToS/IP Preference DSCP Protocol type TCP/UDP port IPv6 Traffic Class IPv6 Flow Label Three Color Marker trTCM srTCM
ACL (Access Control List)	ACL based on: 802.1p priority VID MAC address Ether Type LLC VLAN IP address IP preference/ToS DSCP mask Protocol type TCP/UDP port number IPv6 Traffic Class IPv6 Flow Label Max. ACL entries: Ingress (hardware entries): 4K Egress (hardware entries): 1K VLAN Access Map Numbers: 3K Time-based ACL
Green	Energy-Efficient Ethernet (EEE) Power saving by link status Power saving by cable length Time-based PoE (PoE models only) Power saving by LED shut-off Power saving by port shut-off Power saving by system hibernation
Security	Port Security Supports up to 12K MAC addresses per port/VLAN/system Broadcast/Multicast/Unicast Storm Control D-Link Safeguard Engine DHCP Server Screening Dynamic ARP Inspection IP Source Guard DHCP Snooping IPv6 Snooping Dynamic ARP Inspection (DAI) DHCPv6 Guard IPv6 Route Advertisement (RA) Guard IPv6 ND Inspection Duplicate Address Detection (DAD) ARP Spoofing Prevention Max. 64 entries L3 Control Packet Filtering Unicast Reverse Path Forwarding (URPF) Traffic Segmentation SSL Supports TLS 1.0/1.1/1.2 Supports IPv4/IPv6 access SSH Supports SSH v2 Supports IPv4/IPv6 access BPDU Attack Prevention DOS Attack Prevention NetBIOS/NetBEUI filtering
AAA	802.1X Authentication Supports port/host-based access control Identity-driven Policy Assignment Dynamic VLAN Assignment Bandwidth Control Assignment ACL Assignment Web-based Access Control (WAC) Supports port/host-based access control Identity-driven Policy Assignment Dynamic VLAN Assignment Bandwidth Control Assignment ACL Assignment Support IPv4/IPv6 access Support HTTPS Compound Authentication MAC-based Access Control (MAC) Supports port/host-based access control Identity-driven Policy Assignment Dynamic VLAN Assignment Bandwidth Control Assignment ACL Assignment Guest VLAN Microsoft® NAP Support 802.1X NAP Support DHCP NAP Privilege Level for Management Access RAIDUS and TACACS+ Authentication Authentication Database Failover RADIUS/TACACS+ Accounting
OAM	Cable Diagnostics 802.3ah Ethernet Link OAM D-Link Unidirectional Link Detection (DULD) Dying Gasp 802.1ag Connectivity Fault Management (CFM) Y.1731 OAM Optical Transceiver Digital Diagnostic Monitoring (DDM)
Management	NTPv3/v4 Precision Time Protocol (PTP) Web-based GUI Support IPv4/IPv6 access Support SSL (HTTPS) Command Line Interface (CLI) Telnet Server for IPv4/IPv6 access Telnet Client for IPv4/IPv6 SNMP Support v1/v2c/v3 Support IPv4/IPv6 access SNMP Trap TFTP Client for IPv4/IPv6 FTP Client for IPv4/IPv6 IPv4 SFTP Server RCP System Log for IPv4/IPv6 Syslog Server SMTP RMONv1 Supports 1, 2, 3, 9 groups RMONv2 Supports ProbeConfig group OpenFlow Essential features of OpenFlow 1.3 Single pipeline/flow table Switch mode: Pure/Hybrid Max flow rules: Pure Mode: 2048, Hybrid Mode: 1920 Command Logging LLDP/LLDP-MED D-Link Discover Protocol (DDP) DHCP Client option 12 DHCP Auto-configuration DHCP Auto-image DHCP Relay option 60/61/62/18/37/125 DHCP/DHCPv6 Local Relay DHCP Server Support IPv4/IPv6 address assignment DHCPv6 Prefix Delegation (PD) Multiple Images/ Multiple Configurations DNS Relay for IPv4/IPv6 DNS Client for IPv4/IPv6 Debug Command Password recovery/ encryption Ping/ Traceroute for IPv4/IPv6 Microsoft® Network Load Balancing (NLB) Switch Resource Management (SRM) sFlow D-Link License Management System (DLMS)