Polski
English
Italiano
Español
Čeština
Српски
Deutsch
Ελληνικά
Slovenský
-
1,10 zł netto
Huawei MA5800-X2 OLT terminal without GPON board, 2x MPSC, AC power supply
Prezzo
14 999,00 zł
18 448,77 zł IVA inclusa
favoriteLista dei desideri
The MA5800 is the industry's first smart aggregation OLT with a distributed architecture. It is positioned as the next-generation OLT for NG-PON. The product is designed to help carriers build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver better service experience.
Providing GPON, 10G PON(including XG-PON and XGS-PON), P2P 10GE/GE access, the MA5800 supports deployment on FTTH, FTTD, FTTB, and FTTC networks. This makes it applicable to home access, enterprise access, mobile backhaul, and Wi-Fi hotspot backhaul scenarios to aggregate all services on one fiber network.
The MA5800 functions as a large-capacity aggregation device on the network to aggregate the traffic from ONTs, MDUs, and campus switches, thereby simplifying the network architecture and reducing the OPEX.
MA5800-X2(small-capacity):
MA5800-X2 supports 2 serviceslots withbackplane H901BPSB.
The product includes:
- 2 control boards H901MPSC (4x GE/10GE);
- 1 power board H901PISB (input 230 / 110 V AC);
- fan board.
First launch:
Specification:
| MA5800-X2 | |
| Physical Specifications | |
|---|---|
| Supported cabinet | N63E-22 |
| Maximum weight (including mounting brackets) | 9.4kg |
| Maximum input current |
DC power supply: 20 A AC power supply: 8 A |
| Power supply mode |
DC power support (dual for backup) AC power supply + batteryfor backup |
| Working voltage range |
DC power supply: -38.4 V to -72 V AC power supply: 100 V to 240 V |
| Rated voltage |
DC power supply: -48 V/-60 V AC power supply: 110 V/220 V |
| Ambient temperature |
-40°C to +65°C* The MA5800 can start up at a lowest temperature of −25°C .
*The +65°C temperature refers to the highest temperature measured at the air intake vent. |
| Ambient humidity | 5% RH to 95% RH |
|
Maximum Number of Ports in a Subrack (full configuration) |
|
| GPON ports | 32 |
| XG-PON ports | 32 |
| XGS-PON ports | 32 |
| 10GE/GE ports | 16 |
| GE/FE ports | 96 |
| System specifications | |
| Switching capacity of thecontrol board (load sharing mode) |
MPSC: 480Gbit/s MPSA: 248Gbit/s |
| Maximum bandwidth per service slot (load sharing mode) |
MPSC: 80Gbit/s MPSA: 40Gbit/s |
| Maximum number of concurrent 4K video users | 2000 |
| Maximum number of MAC address | 262143 |
| Maximum number of IPv4 routing tables | 65536 |
| Maximum number of IPv6 routing tables | 16384 |
| Maximum number of ARP tables |
V100R017C10 version: 98816 V100R018C00 and V100R018C10 versions: 131072 V100R019C00 and later versions:32768 |
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
| Bit error rate (BER) in full load | A BER smaller than 10 e-7 for a port that transmits data in full load |
| Primary Features | |
| Layer 2 features |
VLAN+MAC forwarding SVLAN+CVLAN forwarding PPPoE+ DHCP option82 |
| Layer 3 features |
Static route RIP/RIPng OSPF/OSPFv3 IS-IS BGP/BGP4+ ARP DHCP relay VRF |
| MPLS&PWE3 |
MPLS LDP MPLS RSVP-TE MPLS OAM MPLS BGP IP VPN Tunnel protection switching TDM/ETH PWE3 PW protection switching |
| QoS |
Traffic classification Priority processing trTCM-based traffic policing WRED Traffic shaping HQoS PQ/WRR/PQ+WRR ACL |
| Multicast |
IGMP v2/v3 IGMP proxy/snooping MLD v1/v2 (V100R016C10 and later versions) MLD Proxy/Snooping (V100R016C10 and later versions) VLAN-based IPTV multicast IPv4 PIM and PIM-SSM(V100R017C00 and later versions) |
| IPv6 |
IPv4/IPv6 dual stack IPv6 L2 and L3 forwarding DHCPv6 relay |
| System reliability |
GPON type B/type C protection 10G GPON type B protection BFD(V100R016C10 and later versions) ERPS (G.8032) MSTP Monitor Link(V100R018C10 and later versions) Intra-board and inter-board LAG In-service software upgrade (ISSU) of the control board 2 control boards and 2 power boards for redundancy protection In-service board fault detection and rectification Service overload control |
| Eco-friendly and energy-saving | In compliance with the Code of Conduct v5 released by the European Commission |
| VXLAN (V100R018C00 and later versions) | Virtual eXtensibleLAN |
| SRv6 (V100R019C10 and later versions) | Segment Routing IPv6 |
| EMC standards |
IEC 61000-3-2 IEC 61000-3-3 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-11 IEC 61000-4-29 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-29 ETSI ES 201 468 ETSI EN 300 386 ETSI EN 300 132-2 ETSI EN 300 253 VCCI V-3 EN 55024 EN 55032 ITU-T K.20 CISPR 24 CISPR 32 ITU-T K.11 ITU-T K.20 ITU-T K.44 |
| Environment protection standards |
2011/65/EU (RoHS) EN 50581:201 2EC NO. 1907/2006 (REACH) 2012/19/EU (WEEE) |
| Environment standards |
ETS 300 019 1-1 ETS 300 019 1-2 ETS 300 019 1-3 ETS 300 019 2-1 ETS 300 019 2-2 IEC 60068-2 IEC 60721-2-6 IEC 60721-3-1 IEC 60721-3-2 IEC 60721-3-3 ETSI EN 300 753 |
| Security standards |
EN 60950-1 EN 60825-1 EN 60825-2 IEC 60825-1 IEC 60825-2 IEC 60950-1 |
| Reliability standards |
MIL-HDBK-217F BELLCORE TR-332/SR-332 |
| PON interface standards |
ITU-T G.984.1 ITU-T G.984.2 ITU-T G.984.3 ITU-T G.984.4 ITU-T G.987.1 ITU-T G.987.2 ITU-T G.987.3 ITU-T G.988 ITU-T G.9807.1 |
| MPSC (control / upstream board) | |
| Bandwidth per slot (load balancing mode) | 80 Gb/s |
| Upstream or cascading port |
4 x 10GE/GE ports |
| ALM port | Yes (7 Boolean value inputs and 1 Boolean value output) |
| BITS/TOD port | Yes (1 external clock/time input and output) |
| MAC address table size | 262143 |
| Access ONTs | 4096 |
| Multicast users | 4096 |
| IPv4 routing table size | 65536 |
| IPv6 routing table size | 16384 |
| Service ports | 32768 |
| ND table size | 16384 |
| ARP table size | 32768 |
| Ethernet synchronization | Yes |
| 1588v2 | Yes |
| 1588ACR | No |
| D-CCAP | No |
| Maximum Frame Size |
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported. |
| Power Consumption | Static: 53 W Maximum: 67 W |
| H901PISB (power board) | |
| Port |
1 channel of 220 V AC or 110 V AC input 1 battery for backup power |
| Rated output power | 600 W |
| Functions |
Input overcurrent protection Input power monitoring Temperature query and high-temperature alarm |
| Power Consumption |
Static: 5 W 93% (220 V, full capacity, 25°C) |
| Weight | 1.15 kg |
Altri clienti hanno acquistati anche questi prodotti:
Altri prodotti che ti possono interessare: